SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removal and fitting of the wheel hub and bearing assembly (vehicles from 09.00)|Fitting >
< Removal and fitting of the wheel hub and bearing assembly (vehicles from 09.00)
Leon Mk2
Running gear
Running gear, axles, steering
Rear suspension, drive shaft
Repair the wheel bearing assembly (vehicles with brake drums) / moval_and_fitting_of_the_wheel_hub_and_bearing_assembly_(vehicles_from_09.00)/">Removal and fitting of the wheel hub and bearing assembly (vehicles from 09.00)
Removal
Removal
Removal
–
Remove wheel.
–
Insert a screwdriver through one of the screw holes for the wheel bolts on the brake drum, push the wedge upwards and retract the brake.
–
Unscrew the brake drum star bolt and remove the brake drum.
–
Release the dustguard cover of the seat, tapping lightly on the hooks of the extractor -T20078-
–
Unscrew the dodecagonal bolt of the wheel hub and bearing assembly
–
Separate the bearing assembly with the wheel hub from the axle journal.
Running gear
Running gear, axles, steering
Rear suspension, drive shaft
Repair the wheel bearing assembly (vehicles with brake drums) / moval_and_fitting_of_the_wheel_hub_and_bearing_assembly_(vehicles_from_09.00)/">Removal and fitting of the wheel hub and bearing assembly (vehicles from 09.00)
Removal
Removal and fitting of the wheel hub and bearing assembly (vehicles from 09.00)|Fitting >
< Removal and fitting of the wheel hub and bearing assembly (vehicles from 09.00)