seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Dismantle and assemble the steering mount and the steering column > < Remove and fit the steering column with the steering mount .|Removal

Leon Mk2

Fitting
Fitting
Fitting is carried out in the reverse order.
–  Substitute the retaining nut for the beam articulation with a self-locking nut.
–  Tighten the hexagonal bolt
Tightening torque: 25 Nm.
–  Tighten the rupture bolts until the heads are cut off.
Vehicles with airbag up to 08.00
–  Fit the steering wheel → Chapter.
–  Fit the airbag unit → Chapter.
Vehicles with airbag from 09.00
–  Fit the steering wheel → Chapter.
–  Fit the airbag unit → Chapter.
Vehicles without airbag
–  Fitting the steering wheel
   

Dismantle and assemble the steering mount and the steering column > < Remove and fit the steering column with the steering mount .|Removal