Leon Mk2
| Assembly overview of steering mount and the steering column |
Note| t | Replace bolts and self-locking nuts. |
| t | No welding or straightening work is allowed on the elements of the steering system. |
| 1 - | Hexagonal self-locking nut |
| q | Set the tightening torque so that the lever closes when a force of 80 ±5 N is applied. |
| 2 - | Washer |
| q | The embedded metal washer must face the hexagonal nut → Item |
| 3 - | Washer |
| 4 - | Spring element |
| 5 - | Track |
| 6 - | Support bracket |
| 7 - | Spring |
| 8 - | Clamp washer |
| q | Note assembly position → Anchor |
| 9 - | Clamp washer |
| q | Note assembly position → Anchor |
| 10 - | Control lever |
| 11 - | Steering column combination switch |
| 12 - | Steering mount upper element |
| q | With upper element of the column |
| q | With slip release; cannot be disassembled |
| Above a torque of 100 Nm on the steering wheel, the steering column turns together with the steering wheel without damaging the locking pin. |
| 13 - | Steering lock housing |
| q | Removing and fitting the lock cylinder → Electrical system; Rep. Gr.94 |
| 14 - | Track |
| 15 - | Guide pipe |
| 16 - | Steering mount lower element |
| q | With lower element of the column |
| q | Cannot be disassembled |
| 17 - | Hexagonal bolt, 7 Nm |
| 18 - | Bolt |
| 19 - | Hexagonal nut, 25 Nm |
