seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removal: > < Sensor cable - Removing and installing|Installation
Hydraulic pressure part: replacing and adjusting
Hydraulic pressure part: replacing and adjusting
→ Chapter „Removal:“
→ Chapter „Fitting and adjusting“
   
Consult the equivalence table for tools and equipment according to applicability between Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
t  Support frame -VW 313-, see equivalent → Anchor
t  Pressure part -3253/6- 2 sections
t  Torque wrench -V.A.G 1331-, see equivalence → Anchor
t  Pliers for the steering box -VAS 6199-, see equivalent → Anchor
t  Gearbox support -T10108 -, see equivalent → Anchor
t  Adapter -T10304-

   
t  Adapter -T10305-
t  Friction gauge -VAS 6222-
t  Column -3054-

Other necessary special tools without diagram
t  Vacuum for liquids and solids, for example -V.A.G 1373-
t  Drill without cables, for example -VAS 5036-
t  Twist drill 4 mm Ø
t  2 bolts (M10 x 60)
   

Removal: > < Sensor cable - Removing and installing|Installation