seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Power steering box: setting > < Length of the tie rod: verification and adjustment
Steering rack centring: determine
Steering rack centring: determine
  Note
t  Before fitting the power steering box, the steering rack has to be put in a central position.
t  In a new power steering box, the steering rack is already centred.
   
The measurement -a- should be equal on the left and right sides. If the measurement is not equal on both sides then it must be corrected.
–  Check the measurement -a- and if necessary adjust it.
Dimension -a- = 72.5 mm
  E48-10029
–  Adjust the measurement -a- by rotating the input shaft -1- of the steering box.
  E48-10028

Power steering box: setting > < Length of the tie rod: verification and adjustment