SEAT Workshop Service and Repair Manuals > Leon Mk2 > Running gear | Running gear, axles, steering | Steering | Power Steering | Transversal directional bar: removing and fitting

Fitting

For connection, the operations are carried out in reverse order, taking the following into account.

Tightening torque for the direction bar: 80 Nm

–	Check the dustguard for wear (scratching, cracking...) and the sealing surfaces on the dustguard to see if they are clean.

Note

Under no circumstances must a dust guard be fitted in a twisted manner as indicated by the arrows.

–	Tighten the securing clamp using the pliers -T20072A -.

SEAT Workshop Service and Repair Manuals