Leon Mk2
| Assembly overview of steering mount and the steering column |
Note| t | Replace bolts and self-locking nuts. |
| t | No welding or straightening work is allowed on the elements of the steering system. |
| This breakdown is valid for all left-hand drive and right-hand drive vehicles |
| 1 - | Steering lock housing |
| q | Removing and fitting the lock cylinder → Electrical system; Repair Group 94; Steering column combination switch and starter and ignition switch; Lock cylinder: removing and fitting |
| 2 - | Housing ring |
| 3 - | Hexagonal bolt, 40 Nm |
| q | Replace |
| 4 - | Steering column |
| q | Cannot be disassembled |
| 5 - | Control lever |
| 6 - | Tightening bolt |
| 7 - | Steering mount |
| 8 - | Protection sleeve |
| 9 - | Guide |
| 10 - | Flat washer |
| 11 - | Hexagonal nut, self-locking |
| 12 - | Pressure element |
| 13 - | Spring |
| 14 - | Spring |
| 15 - | Casing |
| 16 - | Rupture bolt |
| q | Tighten until the head breaks off |
| 17 - | Bolt 12 Nm |
| 18 - | Hexagonal bolt, 25 Nm |
