seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Significant side wear: correction > < Flattening on the tyres: correction

Leon Mk2

Diagonal wear: correction
Diagonal wear: correction
   
Visual identification
Required verifications
l  Verify the steering geometry and correct it if necessary → Chapter
  WARNING
The following operations can only be completed if wear is in the initial stages.
Tyres with significant wear must be replaced → Chapter.
If only two tyres are replaced then these must be placed on the rear axle.
Procedure
–  Remove the four wheels → Chapter
–  Exchange the wheels of the front axle and the rear axle.
–  Fit the wheels and tighten the bolts to the correct torque → Chapter.
–  Check the tyre pressure and correct if necessary.
  Note
To obtain more information about the rims and the tyres, see the → “Rims and tyres” in the Web section of Elsa.
  E44-10111

Significant side wear: correction > < Flattening on the tyres: correction