Ride height corrections are not possible. If the ride height differs from the set values, the cause could be one of the following. |
The vehicle may have become heavier at the rear due to subsequent installations/conversions. |
–
| If high ride level is e.g. dimension -a- 445 mm, weight must be added to the vehicle. |
–
| If low ride level is e.g. dimension -a- 430 mm, weight must be removed from the vehicle. |
Incorrect spring allocation could also be the cause of incorrect ride height. You may then need to check spring allocation. |
Springs from accessories -lowering sets- also affect ride height. |
|
|
|