seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Service interval display: > < Service interval display
Reset the service interval display to its original setting
Reset the service interval display to its original setting
  Note!
When the display is reset with the mileage button, only the mileometer and the time counter of servicings presently displayed are reset.
Reset the display to its original setting as follows:
–  Switch off the ignition.
   
–  Hold the button located under the speedometer down -1-.
–  Switch on the ignition and hold the button down -1- (min. 10 s) until three dashes (- - -) appear on the display. Only then does the service return to the original setting.
–  Release the button -1-.
After resetting the service interval display, the daily mileage is displayed again.
–  Switch off the ignition.
  N90-0073

Service interval display: > < Service interval display