seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Door safety light and entry light: Removing and installing > < Removing and installing glove box light

Leon Mk2

Front ashtray light: Removing and installing
Front ashtray light: Removing and installing
Removal:
   
–  Switch off ignition and all electrical consumers and take out ignition key.
–  Pull the radio approx. 10 mm out of the radio fitting slot → Rep. gr.91.
–  Remove operating and display unit for air conditioner -E87- → Rep. gr.87.
–  Open front ashtray.
–  Remove front ashtray insert -2-.
–  Pull off cover -1- for gear lever or selector lever on both sides -arrows-.
  A96-10090
–  Unscrew bolts -arrows-.
–  Lift out front ashtray upwards.
–  Separate the electrical connector.
  A96-10091
–  Release retaining clips -2- and swivel light -1- for front ashtray out of retainer -arrow-.
Installation
Installation is carried out in reverse order, noting the following:
–  Install operating and display unit for air conditioner -E87- → Rep. gr.87.
Tightening torque
  A96-10092
Components:Nm
Ashtray (front) to centre console5

   

Door safety light and entry light: Removing and installing > < Removing and installing glove box light