seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing footwell light (front) > < Front ashtray light: Removing and installing

Leon Mk2

Door safety light and entry light: Removing and installing
Door safety light and entry light: Removing and installing
Removal:
   
–  Switch off ignition and all electrical consumers and take out ignition key.
–  Use a flat-head screwdriver to press in retaining tab -1- and pry out door safety light or entry light -2-.
–  Disconnect the electrical connector -3-.
  A96-0458
–  If fitted, carefully pry off cover at door safety light -arrow-.
–  Take bulb (12 V, 5 W) on reverse side of door safety light or entry light out of bulb holder.
Installation
Installation is carried out in reverse order, noting the following:
–  If applicable, attach cover at door safety light.
–  Insert door safety light or entry light in opening and engage on opposite side.
  A96-0481

Removing and installing footwell light (front) > < Front ashtray light: Removing and installing