seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Rear ashtray light: Removing and installing > < Door safety light and entry light: Removing and installing
Removing and installing footwell light (front)
Removing and installing footwell light (front)
Removal:
   
–  Switch off ignition and all electrical consumers and take out ignition key.
–  Use a flat screwdriver to press in retaining tab -1- and pry out footwell light -2-.
–  Unplug the electrical connector -3-.
–  Take bulb (12 V, 5 W) on reverse side of footwell light out of bulb holder.
Installation
Installation is carried out in reverse order, noting the following:
–  Insert footwell light in opening and engage on opposite side.
  E96-10128

Rear ashtray light: Removing and installing > < Door safety light and entry light: Removing and installing