seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Daytime running lamp DRL: replace > < Renewing gas discharge bulb
Parking light bulb: replace
Parking light bulb: replace
  WARNING
High voltage! Danger to life!
Safety precautions when handling gas discharge bulbs → Electrical system; General information; Rep. gr.94.
Removal:
   
–  Switch off ignition and all electrical consumers and take out ignition key.
–  Turn light switch to „0“ position.
–  Unscrew bolts -arrows-.
–  Disengage solenoid valve 1 for the active carbon vessel -N80--item 1- on the air duct.
–  Remove air duct -2-.
  A10-0900
–  Unhook retaining spring -arrow- and remove the cover of the dipped beam headlight from headlamp housing -1-.
–  Pull bulb and bulb socket -1- out in direction of -arrow- by pulling on handle.
  E94-10220
–  Pull bulb out of bulb socket.
Installation
Installation is carried out in reverse order, noting the following:
–  Insert new bulb in bulb holder, taking care not to touch glass bulb with bare hands.
–  Press bulb holder for side lights into reflector until you feel it engage.
–  Close housing cover.
–  Secure housing cover with retaining spring.
  E94-10229

Daytime running lamp DRL: replace > < Renewing gas discharge bulb