seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fog light bulb: Removing and installing > < Fog lamps: Assembly overview

Leon Mk2

Fog lamps: Removing and installing
Fog lamps: Removing and installing
Special tools and workshop equipment required
t  Torque wrench -V.A.G 1783-
   
t  Lever -U30800-
  Note
The figures show the removal or installation of the left headlight, the procedure with the left headlight is the same.
Removing
  W00-0990
–  Disconnect ignition and all electrical loads, and remove ignition key.
  E94-10383
–  Remove the guard element -1- of the front bumper → Bodywork, exterior fitting work; Rep. gr.63.
–  Unscrew the bolt.
–  Unlock and remove the electric connector -1-.
Installation:
Installation is carried out in the reverse order. When installing, note the following:
–  Tighten the bolts to the specified tightening torque → Chapter.
–  Check the function of the fog light.
–  Check the adjustment of the fog light and adjust this when necessary „maintenance to be considered precisely“; → Booklet701.
  E94-10384

Fog light bulb: Removing and installing > < Fog lamps: Assembly overview