SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Airbag spiral spring/retractor ring with collector ringF138: removing and fitting|Installation >
< Airbag spiral spring/retractor ring with collector ringF138: removing and fitting
Leon Mk2
Vehicle electrics
Electrical system
Lights, lamps, switches outside
Steering column of the switch module, Vehicles ? 05/2010 / rbag_spiral_spring/retractor_ring_with_collector_ringf138_removing_and_fitting/">Airbag spiral spring/retractor ring with collector ringF138: removing and fitting
Removal:
Removal:
Removal:
–
Disconnect the battery.
–
Remove driver's side airbag module
→ Bodywork, Interior fitting work; Rep. gr.69
–
Remove steering wheel
→ Chassis, axles, steering; Rep. gr.48
.
–
Remove the steering column trim
→ Bodywork, interior installation work; Rep. gr.68
.
Note
When installing the coil, the slip ring must be located in the centre position and the wheels must be positioned „facing forwards“.
–
Remove steering column electronics control unit -J527-
→ Chapter
.
–
Carefully release fasteners
-arrows-
and pull coil connector with slip ring off steering column
-1-
switch module.
Vehicle electrics
Electrical system
Lights, lamps, switches outside
Steering column of the switch module, Vehicles ? 05/2010 / rbag_spiral_spring/retractor_ring_with_collector_ringf138_removing_and_fitting/">Airbag spiral spring/retractor ring with collector ringF138: removing and fitting
Removal:
Airbag spiral spring/retractor ring with collector ringF138: removing and fitting|Installation >
< Airbag spiral spring/retractor ring with collector ringF138: removing and fitting