seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing steering column switch and steering lock housing with ignition switch, vehicles ??05.00 > < Removing and installing steering wheel, vehicles ??05.00

Leon Mk2

Removing and installing coil connector with slip ring, vehicles ▸ 05.00
Removing and installing coil connector with slip ring, vehicles ► 05.00
  Note!
t  If the vehicle has a security-coded radio, obtain the anti-theft code from customer before disconnecting the battery.
t  To disconnect and reconnect the battery, the procedure described in the workshop manual should be strictly adhered to → Chapter.
–  Remove driver side airbag unit → General body repairs, interior; Rep. Gr.69.
–  Disconnect single connector for horn.
   
–  Remove cross-head screws -1- and pull coil connector with slip ring -2- off steering wheel.
  Note!
t  Removal and installation of the coil connector with slip ring must be undertaken in the central position (wheels straight ahead).
t  A new coil connector with slip ring is secured in the central position by a cable tie.
  V68-0598

Removing and installing steering column switch and steering lock housing with ignition switch, vehicles ??05.00 > < Removing and installing steering wheel, vehicles ??05.00