seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing poly-V-belt, 4-cylinder engines 06.00 ? > < Checking poly-V-belt

Leon Mk2

Removing and installing poly-V-belt, 4-cylinder engines ▸ 05.00
Removing and installing poly-V-belt, 4-cylinder engines ► 05.00
Special tools and workshop equipment required
   
t  Lever for poly-V-belt -VAS 3299-
  Note!
t  Mark direction of rotation of poly-V-belt before removing and observe when installing. Reversing the direction of rotation will lead to destruction of belt!
t  It is essential to renew the poly-V-belt if a fault is found. This will avoid possible breakdowns or malfunctions.
t  It is not necessary to adjust the poly-V-belt tension, as a spring loaded tensioner guarantees the best possible belt tension.
Removing:
  W00-0158
–  Lift tensioning roller with poly-V-belt lever -VAS 3299- and remove poly-V-belt from alternator belt pulley.
–  Remove V-belt for power steering vane pump → Running gear; Rep. Gr.48
–  Remove poly-V-belt.
Installing:
  Note!
t  When fitting used poly-V-belts observe the direction of rotation marked on removal!
t  When fitting belt, ensure that poly-V-belt seats correctly in pulleys!
Belt drive with no air conditioner compressor:
–  Fit poly-V-belt to crankshaft pulley/vibration damper and coolant pump pulley.
  V13-1219
–  Lift tensioning roller with poly-V-belt lever -VAS 3299- and fit poly-V-belt onto alternator belt pulley.
–  Lower tensioning roller onto poly-V-belt with poly-V-belt lever -VAS 3299-.
–  Install V-belt for power steering vane pump → Running gear; Rep. Gr.48
Belt drive with air conditioner compressor:
–  Fit poly-V-belt to crankshaft pulley/vibration damper and compressor pulley.
  V13-1219
–  Lift tensioning roller with poly-V-belt lever -VAS 3299- and fit poly-V-belt onto alternator belt pulley.
–  Lower tensioning roller onto poly-V-belt with poly-V-belt lever -VAS 3299-.
–  Install V-belt for cooling system and power steering vane pump → Running gear; Rep. Gr.48
  V13-1220

Removing and installing poly-V-belt, 4-cylinder engines 06.00 ? > < Checking poly-V-belt