Fabia Mk1
Removing and installing lock carrier with component parts |
1 - | Lock carrier with attached parts |
q | removing: |
– | Detach Bowden wire → Item on the lock. |
– | Separate the electrical plug connections in the headlamp housing. |
– | Removing front bumper. |
– | Release screws → Item and remove bumper brackets → Item. |
– | Loosen the radiator and condenser → Item from the lock carrier → Item by releasing the screws → Item. |
Secure the radiator and condenser in the engine compartment → Heating, Air conditioning; Rep. Gr.87. |
Note
t | Do not suspend the condenser to the wires. |
t | Do not fold the condenser wires. |
q | Installing: |
– | Centre the lock carrier with component parts on the frame side rails and between the wings. |
– | Readjust the headlights. |
2 - | 30 Nm |
3 - | 5 Nm |
4 - | Radiator and condenser |
5 - | Bowden wire |
6 - | 50 Nm |
7 - | Bumper bracket |
8 - | 35 Nm |