| Removing and installing decorative strips |
| Special tools and workshop equipment required |
| t
| Hot air pistol, e.g. -HLG - 600- |
| t
| Degreased white spirit solution |
| t
| Doubled-side adhesive tape such as that available from the company 3M; width = 8 mm, thickness = 0.8 ± 0.1 mm |
| –
| Warm up the decorative strip using the hot air pistol. Air temperature max. 100°C. |
| –
| Carefully remove the decorative strip. |
| –
| Clean off adhesive residue -3- from the sealing profile -2 - and decorative strip -1- with technical petrol. |
| –
| Clean the sealing profile -2- and decorative strip -1- with degreased white spirit solution. |
| –
| Glue on the sealing profile -2- using doubled-sided adhesive tape -3-. |
| –
| Remove the protective foil from the adhesive tape -3-. |
|
|
|
Note
