skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing the rear wheelhouse liner > < Wheelhouse liner
Removing and installing the front wheelhouse liner
Removing and installing the front wheelhouse liner
Removing
   
–  Unscrew wheel, Mu = 120 Nm.
–  Release screws -2-.
–  Remove wheelhouse liner -1-.
  Note
For vehicles with engine identification characters ATD and AUN: When removing the wheelhouse liner the wheelhouse noise insulation panel -3- may fall out. It must be re-inserted, if necessary replace.
Install
Installation is carried out in the reverse order.
  S66-0093

Removing and installing the rear wheelhouse liner > < Wheelhouse liner