skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing front passenger airbag key switch > < Removing and installing side airbag units
Removing and installing the airbag control unitJ234
   
Removing and installing the airbag control unit -J234-
1 - Nut
2 - Plug for Airbag control unit
3 - Airbag control unit
  Note
Additional operations should be carried out after the battery earth strap has been disconnected and connected → Electrical System; Rep. Gr.27.
Removing
–  Disconnect earth strap of the battery.
–  Remove right footwell covering on driver's side.
–  Removing the front centre console → Chapter.
–  If necessary, cut the carpet and insulation matting around the airbag control unit.
–  Unlock the connector lock -2- and remove the connector.
–  Unscrew nuts -1-.
–  Remove airbag control unit-3-.
Install
–  Installation is carried out in the reverse order.
  WARNING
Nobody should be in the vehicle when the battery is being connected.
  Note
Conduct coding → Chapter when replacing the airbag control unit.
  S69-0107
Tightening torque
ComponentTightening torques
Airbag control unit to body8 Nm

   

Removing and installing front passenger airbag key switch > < Removing and installing side airbag units