skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing restoring ring with slip ring > < Summary of components of four-armed steering wheel 08.04 ?
Summary of components of three-armed steering wheel
   
Summary of components of three-armed steering wheel
1 - Steering wheel
q   Removing:
–  Removing the airbag unit Pos. 4, removing horn module if necessary on vehicles without airbag.
–  Turn the steering wheel to centre position (wheels in straightahead position).
–  Release screws Pos. 2 and mark the opposite position of the steering wheel and shaft with a line, then remove the steering wheel from the steering column.
q   Installing:
Installation is carried out in the reverse order.
2 - 50 Nm
q   can be used up to five times, then replace with new original part.
q   mark with a dot after each mounting
3 - 5 Nm
4 - Airbag unit
q   removing and installing → Chapter
5 - Fixing plate
6 - Connector

   

Removing and installing restoring ring with slip ring > < Summary of components of four-armed steering wheel 08.04 ?