Fabia Mk1
Note
|
1 - | Fixed window pane |
q | removing: |
– | Removing cover → Item. |
– | Remove the outer → Item channel seal. |
– | Remove the inner → Item channel seal. |
– | Release screw → Item. |
– | Remove the window pane. |
q | Installing: |
Installation is carried out in the reverse order. |
2 - | Outside channel seal |
3 - | Door |
q | removing and installing → Chapter |
4 - | Inside window run |
5 - | 3.5 Nm |
6 - | Inside channel seal |
7 - | Assembly carrier |
q | removing: |
– | Removing door trim panel → Chapter. |
– | Unclip securing rod. |
– | Release screws → Item. |
– | Remove the assembly carrier. |
q | Installing: |
Installation is carried out in the reverse order. |
8 - | 8 Nm |
9 - | 8 Nm |
10 - | Holding bracket for the cover |
11 - | Stop |
12 - | Cover |
q | removing: |
– | Remove assembly carrier → Item. |
– | Release screw → Item. |
– | Remove the holding bracket → Item with stop → Item and let the cover lower downwards. |
– | Remove the cover. |
q | Installing: |
Installation is carried out in the reverse order. |