Skoda Workshop Service and Repair Manuals

Test table with LIN databus cable Display group 001

Display field		Readout on display	Denomination	Rectifying fault
1		not fitted → Note	Central switch for window lifter: switch for window lifter DS	–  Check window lifter switch for correct fitting and tightness. –  Check relevant plug connections for correct fitting and tightness. –  Check relevant cables according to valid current flow diagram → Current flow diagrams and Fitting locations. –  Perform a functional test.
2		not fitted → Note	WL thermo fuse DS
3		not fitted → Note	Child safety catch switch

1)  Ignore Display group number 002

Display field		Readout on display	Denomination	Rectifying fault
1		not fitted → Note	Central switch for window lifter: switch for window lifter FPS	–  Check window lifter switch for correct fitting and tightness. –  Check relevant plug connections for correct fitting and tightness. –  Check relevant cables according to valid current flow diagram → Current flow diagrams and Fitting locations. –  Perform a functional test.
2		not fitted → Note	Central switch for window lifter: switch for window lifter RR
3		not fitted → Note	Central switch for window lifter: switch for window lifter RL

2)

Ignore.

Display group number 003

Display field		Readout on display	Denomination	Rectifying fault
1		not fitted → Note	Mirror adjustment switch	–  Check mirror adjustment switch for correct fitting and tightness. –  Check relevant plug connections for correct fitting and tightness. –  Check relevant cables according to valid current flow diagram → Current flow diagrams and Fitting locations. –  Perform a functional test.
2		not fitted → Note	Mirror selection switch
3		not fitted → Note	Mirror ratchet control DS
4		not fitted → Note	Mirror heating

3)  Ignore. Display group number 004

Display field		Readout on display	Denomination	Rectifying fault
1		not fitted → Note	Window lifter switch: door FPS	–  Check window lifter switch for correct fitting and tightness. –  Check relevant plug connections for correct fitting and tightness. –  Check relevant cables according to valid current flow diagram → Current flow diagrams and Fitting locations. –  Perform a functional test.
2		not fitted → Note	WL thermo fuse PS
3		not fitted → Note	Mirror ratchet control PS

4)

Ignore.

Display group number 005

Display field		Readout on display	Denomination	Rectifying fault
1		not fitted → Note	Window lifter switch: door RL	–  Check window lifter switch for correct fitting and tightness. –  Check relevant plug connections for correct fitting and tightness. –  Check relevant cables according to valid current flow diagram → Current flow diagrams and Fitting locations. –  Perform a functional test.
2		not fitted → Note	WL thermo fuse RL
3		not fitted → Note	Window lifter switch: door RR
4		not fitted → Note	WL thermo fuse RR

5)  Ignore. Display group number 006

Display field		Readout on display	Denomination	Rectifying fault
1		xx.x V	Onboard voltage, term. 30	–  Visual inspection of the cable guide –  Check the correct fitting and tightness of the plug connections of the relevant circuit while observing the display. If the display content does not change during activation, rectify fault or replace the relevant component. –  Check relevant cables according to valid current flow diagram → Current flow diagrams and Fitting locations. –  Erase fault memory. –  Perform a functional test. –  Interrogate the fault memory again.
2		term. 15 on term. 15 off no contact	Ignition, term. 15
3		activated deactivated no contact	S contact
4		0- 225 km/h (after 2 km/h) no measured value no contact	current speed

Display group number 007

Display field		Readout on display	Denomination	Rectifying fault
1		open closed not activated.	Key switch DS	–  Test wiring and plug connections according to current flow diagram. –  Check lock cylinder for correct fitting and tightness. –  Check the correct fitting and tightness of the plug connections of the relevant circuit while observing the display. If the display content does not change during activation, rectify fault or replace the relevant component. –  Erase fault memory. –  Perform a functional test. –  Interrogate the fault memory again.
2		open closed not activated.	Key switch PS
3		locking unlocking not activated implausible	Lock/Unlock button DS
4		locking unlocking not activated implausible	Lock/Unlock button DS → Note

6)	Not fitted on FABIA.

Display group number 008

Display field		Readout on display	Denomination	Rectifying fault
1		not fitted open closed no contact	Engine hood contact	–  Visual inspection of the cable guide –  Check switch for correct fitting and tightness. –  Check the correct fitting and tightness of the plug connections of the relevant circuit while observing the display. If the display content does not change during activation, rectify fault or replace the relevant component. –  Check relevant cables according to valid current flow diagram → Current flow diagrams and Fitting locations. –  Erasing fault memory –  Perform a functional test. –  Interrogate the fault memory again.
2		locking unlocking not activated implausible	Key switch tailgate
3		open closed no contact	Tailgate contact switch
4		yes no	Central locking thermo fuse → Note

7)	yes- thermo fuse active (system disconnected), no- thermo fuse not active (system in operation).

Display group number 009

Display field		Readout on display	Denomination	Rectifying fault
1		unlock lock safe not fitted	CL acknowledgement: door DS	–  Visual inspection of the cable guide –  Check the correct fitting and tightness of the plug connections of the relevant circuit while observing the display. If the display content does not change during activation, rectify fault or replace the relevant component. –  Check relevant cables according to valid current flow diagram → Current flow diagrams and Fitting locations. –  Erase fault memory. –  Perform a functional test. –  Interrogate the fault memory again.
2		unlock lock safe not fitted	CL acknowledgement: door PS
3		unlock lock safe not fitted	CL acknowledgement: door RL
4		unlock lock safe not fitted	CL acknowledgement: door RR

Display group 010

Display field		Readout on display	Denomination	Rectifying fault
1		Door open door closed	Rotary latch switch: DS	–  Visual inspection of the cable guide. –  Check rotary latch switch for correct fitting and tightness. –  Check the correct fitting and tightness of the plug connections of the relevant circuit while observing the display. If the display content does not change during activation, rectify fault or replace the relevant component. –  Check relevant cables according to valid current flow diagram → Current flow diagrams and Fitting locations. –  Erase fault memory. –  Perform a functional test. –  Interrogate the fault memory again.
2		Door open door closed	Rotary latch switch: FPS
3		Door open door closed not fitted	Rotary latch switch: RL
4		Door open door closed not fitted	Rotary latch switch: RR

Display group number 011

Display field		Readout on display	Denomination	Rectifying fault
1		yes no not fitted no contact	Immobilizer key detection	–  Test wiring and plug connections according to current flow diagram. –  Test immobiliser → Rep. Gr.90. –  Re-initialise radio control via function 10 “Adaptation” → Chapter.
2		activated deactivated not fitted	Automatic lock/unlock switch (>15 km/h) → Note	–  Check switch for correct fitting and tightness. –  Check the correct fitting and tightness of the plug connections of the relevant circuit while observing the display. If the display content does not change during activation, rectify fault or replace the relevant component. –  Check relevant cables according to valid current flow diagram → Current flow diagrams and Fitting locations. –  Erase fault memory. –  Perform a functional test. –  Interrogate the fault memory again.
3		on off	Sliding/tilting roof closed
4		Two-wire single wire	Bus status

8)	Not fitted on FABIA.

Display group number 012

Display field		Readout on display	Denomination	Rectifying fault
1 to 4		No display → Note

9)  Ignore. Display group number 013

Display field	Readout on display	Denomination	Rectifying fault
1	O.K. N.O.K. no measured value	Fixed code known → Note	If “N.O.K.” –  Key code is outside of reception range. Re-initialise radio control via function “10”(Adaptation) → Chapter. If “no measured value” –  Battery in key discharged, replace battery. –  Remote control defective, replace remote control. –  When activating a key initialised by radio control, the position in which the key was initialised is displayed here. If the tester displays “0”, even though a radio control button was pressed, the key must be re-initialised via function “10” Adaptation → Chapter.
2	O.K. N.O.K. no measured value	Code in reception range → Note
3	O.K. N.O.K. no measured value	Algorithm → Note
4	0…4	Key number (key having just been activated) → Note

10)	Only for vehicles with remote control and alarm function → Chapter

Display group number 014

Display field		Readout on display	Denomination	Rectifying fault
1		0 0 0 0 → Note	Remote control key buttons → Note unlocking locking HDF Panic → Note	If “N.O.K.” –  Key code is outside of reception range. Re-initialise radio control via function “10”(Adaptation) → Chapter. If “no measured value” –  Battery in key discharged, replace battery. –  Remote control defective, replace remote control.
2		yes no not fitted	sensor for interior monitoring → Note
3		on off not fitted	IRUE cut-off → Note → Note
4		not fitted

11)	HDF - Tailgate remote unlocking button, panic-alarm by remote control; not fitted on FABIA.

12)	Only for vehicles with remote control and alarm function → Chapter

13)	0=not activated, 1=activated

14)	Not fitted on FABIA

Display group number 015 Only for vehicles with remote control and alarm function → Chapter

On other vehicles the following is displayed on the display of the diagnostic device:

Function unknown or cannot be carried out at the moment

Display field		Readout on display	Denomination	Rectifying fault
1		1…65535	Last alarm source	Only the last 4 activation zones of the anti-theft alarm system are displayed! e.g. “32” - engine hood contact switch → Chapter.
2		1…65535	Penultimate alarm source
3		1…65535	3. last alarm source
4		1…65535	4. last alarm source