skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Pillar and side trim panels > < Removing and installing window crank
Removing and installing the rear door trim panel (Praktik)
Removing and installing the rear door trim panel (Praktik)
Special tools and workshop equipment required
t  Removal tool for inner lining of the door panel -MP 8-602/1 -
Removing
   
–  Slacken the door trim panel -3- at the sides from the clips -2- using the removal tool -MP 8-602/1-.
  Note
Do not damage the painted surfaces.
–  Remove door trim panel -3-.
Install
–  Insert clips -2- into the door trim panel -3-.
–  Position adjusting washers -4- on clips -2-.
–  Fix the door trim panel -3- to the door -1-.
  S70-0265

Pillar and side trim panels > < Removing and installing window crank