–
| Pull off top part of bottom trim panel -1- in direction of the tailgate. |
–
| Insert a long screwdriver into the retaining clips and release the clips -Arrow A-. |
–
| Grab the trim panel -1- at the loose part and loosen bottom part of trim panel by pulling upwards -Arrow B- (if necessary slacken with screwdriver). |
–
| Recondition the clips → Item in the trim panel of pillar B or replace with new ones. |
–
| Press trim panel -1- with clips into pillar B. |
–
| Place door seal into the correct position. |
|
|
|