skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Summary of components of entrance plate > < Removing and installing top trim panel of pillar D

Fabia Mk1

Removing and installing the base plate (notchback)
Removing and installing the base plate (notchback)
Removing
–  Pull out seat bench and tilt forward.
–  Remove fixing screw from fitting at bottom of seat belt → Chapter.
–  Fold the rear seats forwards.
–  Remove top → Chapter and bottom → Chapter trim panel of pillar C.
   
–  Unscrew the two screws -2- (1.5 Nm) attaching the base plate -3-.
–  Run seat belt through the opening in the base plate.
–  Take off door seal in the area of the base plate.
–  Separate plug connections for rear speakers and take out base plate.
Install
Installation is carried out in the reverse order.
  S70-0243

Summary of components of entrance plate > < Removing and installing top trim panel of pillar D