skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Fitting position of the ABS systems BOSCH 5.7 and BOSCH 8.0 > < General Instructions

Fabia Mk1

Distinguishing features
Distinguishing features
  Note
Identification and assignment of the ABS systems → Electronic catalogue of original parts.
   
ABS BOSCH 5.7
t  Dimension -a-: 102 mm
t  8 valve domes: The protective sleeves for the valves are visible if the control unit is separated from the hydraulic unit → Chapter
t  Control unit identification: The control unit version can be displayed using the vehicle system tester -V.A.G 1552- in the function 01 „Interrogate control unit version“ → Chapter or using the vehicle diagnosis, measurement and information system -VAS 505x- → Vehicle diagnostic, testing and information system VAS 5051
t  Overview of selectable functions → Chapter
  S45-0108
ABS/EDL/TCS BOSCH 5.7
t  Dimension -a-: 127 mm
t  12 valve domes: The protective sleeves for the valves are visible if the control unit is separated from the hydraulic unit → Chapter
t  Control unit identification: The control unit version can be displayed using the vehicle system tester -V.A.G 1552- in the function 01 „Interrogate control unit version“ → Chapter or using the vehicle diagnosis, measurement and information system -VAS 505x- → Vehicle diagnostic, testing and information system VAS 5051
t  Overview of selectable functions → Chapter
  S45-0114
ABS/EDL/TCS/ESP BOSCH 5.7
t  Dimension -a-: 130 mm
t  12 valve domes
t  Brake pressure sender 1 -G201- (-1-)
t  Control unit identification: The control unit version can be displayed using the vehicle system tester -V.A.G 1552- in the function 01 „Interrogate control unit version“ → Chapter or using the vehicle diagnosis, measurement and information system -VAS 505x- → Vehicle diagnostic, testing and information system VAS 5051
t  Overview of selectable functions → Chapter
  S45-0105
ABS, ABS/TCS BOSCH 8.0
t  Dimension -a-: 80 mm
t  Inscription „ABS“ on the hydraulic unit for ABS -N55-
t  8 valve domes: The protective sleeves for the valves are visible if the control unit is separated from the hydraulic unit.
t  Control unit identification: The control unit version can be displayed using the vehicle system tester -V.A.G 1552- in the function 01 „Interrogate control unit version“ → Chapter or using the vehicle diagnosis, measurement and information system -VAS 505x- → Vehicle diagnostic, testing and information system VAS 5051
  S45-0175
ABS/TCS/ESP BOSCH 8.0
The hydraulic control unit ABS/TCS/ESP BOSCH 8.0 must not be disassembled. It must be replaced as a complete unit in the case of repairs.
t  Dimension -a-: 103 mm
t  Inscription „ESP“ on the hydraulic unit for ABS -N55-
t  12 valve domes
t  Control unit identification: The control unit version can be displayed using the vehicle system tester -V.A.G 1552- in the function 01 „Interrogate control unit version“ → Chapter or using the vehicle diagnosis, measurement and information system -VAS 505x- → Vehicle diagnostic, testing and information system VAS 5051
  S45-0176

Fitting position of the ABS systems BOSCH 5.7 and BOSCH 8.0 > < General Instructions