| Contact | Wiring to component ... |
| 1 | Earth terminal 31 |
| 2 | Voltage supply of battery + (terminal 30) |
| 5 | Earth terminal 31 |
| 6 | Voltage supply of battery + (terminal 30) |
| 81) | Lateral acceleration sender -G200- (signal line) |
| 91) | Lateral acceleration sender -G200- and yaw rate sender -G202- |
| 101) | Lateral acceleration sender -G200- and yaw rate sender -G202- |
| 12 | Front left wheel speed sensor -G47- |
| 13 | Speed sensor rear left -G46- |
| 14 | Speed sensor rear left -G46- |
| 15 | Front right wheel speed sensor -G45- |
| 16 | Front right wheel speed sensor -G45- |
| 192) | Rear right speed sensor output |
| 211) | Lateral acceleration sender -G200- and yaw rate sender -G202- (earth cable) |
| 23 | Voltage supply (terminal 15) |
| 24 | Data BUS cable (CAN-R) → Current flow diagrams, Electrical fault finding and Fitting locations |
| 251) | Brake pressure sender 1 -G201- (earth cable) |
| 261) | Brake pressure sender 1 -G201- (signal line) |
| 27 | Traction control system switch -E132- or TCS and ESP button -E256- |
| 28 | Front left wheel speed sensor -G47- |
| 30 | Rear right wheel speed sensor -G44- |
| 31 | Rear right wheel speed sensor -G44- |
| 32 | Brake light switch -F- |
| 342) | Rear left speed sensor output |
| 371) | Brake pedal switch -F47- |
| 381) | Switch for hand-brake control -F9- |
| 391) | Voltage supply for:| t
| Steering angle sender -G85- |
| t
| Lateral acceleration sender -G200- |
|
| 40 | Data BUS cable (CAN-L) → Current flow diagrams, Electrical fault finding and Fitting locations |
| 411) | Yaw rate sender -G202- (signal line) |
| 421) | Brake pressure sender 1 -G201- (voltage supply) |
Note
