Connect vehicle diagnosis, measurement and information system -VAS 505x- and select function (ABS systems BOSCH 5.7 and BOSCH 8.0) |
The self-diagnosis of the ABS systems BOSCH 5.7 and BOSCH 8.0 can be performed using the vehicle diagnosis, measurement and information system -VAS 505x-. |
Special tools and workshop equipment required |
t
| Vehicle diagnosis, measurement and information system -VAS 505x- |
WARNING t
| For test drives, the test and measuring equipment must always be fastened to the rear seat. |
t
| The equipment must be operated by an assistant during test drives. |
|
–
| Mount the plug of the diagnostic cable on the diagnostic connection below the storage compartment on the driver's side. |
–
| Switch on vehicle diagnosis, measurement and information system -VAS 505x-. |
The vehicle diagnosis, measurement and information system -VAS 505x- is operational, if it shows the keyboards of its operating modes. |
–
| On the screen, press „Targeted fault finding“. |
t
| Engine identification characters |
–
| Confirm the entered data. |
Wait until the vehicle diagnosis, measurement and information system -VAS 505x- has communicated with all the control units in the vehicle (vehicle system test). |
–
| Press the „Skip button“ and choose the „Functions/Components option“. |
–
| Select on the display „chassis“. |
–
| Select on the display „Brake system“. |
–
| Select on the display the indicated „01-self-diagnosable system ...“. |
–
| Select on the display the indicated „Antilock braking system ...“. |
Now all possible components and functions of the antilock braking system in the vehicle are indicated. |
–
| Select on the display the desired component or function. |
|
|
|