skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the foot controls - LHD version > < Assembly overview of the foot controls, brake pedal - LHD version

Fabia Mk1

Separating the brake pedal from the brake servo unit and clipping onto brake servo unit
Separating the brake pedal from the brake servo unit and clipping onto brake servo unit
Special tools and workshop equipment required
t  Release tool -T10159A-
Separating the brake pedal from the brake servo unit
–  Removing the lower part of the dash panel → Body Work; Rep. gr.70.
–  Remove brake light switch → Chapter.
  Note
The fig. shows the separation of the brake pedal from the brake servo unit with the foot controls removed for clarity.
   
–  Press the brake pedal towards the brake servo unit and hold it in position.
–  Insert release tool -T10159A- and pull towards the driver's seat while counterholding the brake pedal. (At this moment the pedal must not move backwards.)
   This causes the retaining lugs -3- of the support to be pressed off the spherical head of the push rod -2-.
–  Pull the release tool and brake pedal jointly towards the driver's seat. (This causes the brake pedal to be drawn off the ball knob of the pressure rod).
Clipping the brake pedal onto the brake servo unit
  S46-0178
–  Hold the spherical head of the pressure rod -2- in front of the support and press the brake pedal towards the brake servo unit until the spherical head locks audibly into place.
3 - Bearing bracket
–  Setting and installing the brake light switch → Chapter
–  Installing the lower part of the dash panel → Body Work; Rep. gr.70.
–  Check operation of the brake lights.
  S46-0115

Removing and installing the foot controls - LHD version > < Assembly overview of the foot controls, brake pedal - LHD version