skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing brake shoe - Drum brake > < Checking the wheel-brake cylinder for tightness
Checking the brake pad thickness through the inspection hole in the brake carrier.
   
Checking the brake pad thickness through the inspection hole in the brake carrier.
–  Unclip cap -1- from the brake carrier-2-.
–  Checking the brake pad thickness through the inspection hole in the brake carrier.
   Minimum pad thickness without supporting shoe (wear dimension) 1.5 mm.
  Note
The brake pads must not be soiled with brake fluid or grease.
  S46-0094

Removing and installing brake shoe - Drum brake > < Checking the wheel-brake cylinder for tightness