Fabia Mk1
Summary of components of brake-power regulator |
Note
t | After removing the brake lines close connection bores on the brake-power regulator with screw plugs. |
t | Only remove the screw plugs of the connection bores immediately before installing the brake lines. |
WARNING
|
1 - | Brake-power regulator |
q | load dependent |
q | Assignment → Electronic Catalogue of Original Parts |
q | testing and adjusting → Chapter |
q | Adjusting values → Chapter |
2 - | Support |
q | for brake-power regulator |
3 - | 20 Nm |
4 - | Brake line with pipe screw |
q | Brake-power regulator - rear right brake hose |
q | Tightening torque of the pipe screws: 14 Nm |
5 - | Brake line with pipe screw |
q | Brake-power regulator - rear left brake hose |
q | Tightening torque of the pipe screws: 14 Nm |
6 - | Brake line with pipe screw |
q | Master brake cylinder - brake-power regulator |
q | Tightening torque of the pipe screws: 14 Nm |
7 - | Brake line with pipe screw |
q | Master brake cylinder - brake-power regulator |
q | Tightening torque of the pipe screws: 14 Nm |
8 - | Bearing bracket |
q | for rear axle |
9 - | 20 Nm |
10 - | Screw |
11 - | Nut, 20 Nm |
12 - | Tension spring |
13 - | Rear left brake hose |
14 - | Rear axle |
15 - | 16 Nm |