skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the axle stud - Disc brake > < Removing and installing axle studs

Fabia Mk1

Removing and installing the axle stud - Drum brake
Removing and installing the axle stud - Drum brake
–  Removing the wheel hub with wheel bearing → Chapter.
–  Remove brake line from wheel-brake cylinder → Chapter.
   
–  Release screws -arrows-.
–  Remove brake carrier with brake shoe → Chapter.
–  Remove the axle stud.
Installation is carried out in the reverse order.
–  Install the brake line on the wheel-brake cylinder → Chapter
–  Bleeding Brake System → Chapter.
  S42-0130
Tightening torques:
Axle stud to axle body
t  Use new screws!
30 Nm + 90°
Twelve-point nut to axle stud
t  Use new nut!
70 Nm +30°
Drum brake to wheel hub4 Nm
Brake line to wheel-brake cylinder14 Nm
Wheel bolts120 Nm

   

Removing and installing the axle stud - Disc brake > < Removing and installing axle studs