skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Hydraulic oil at a normal operating temperature (for an engine temperature above 50°C) > < Inspecting hydraulic oil level, if necessary topping up
Hydraulic oil in a cold condition (for an engine temperature up to approx. 50°C)
Hydraulic oil in a cold condition (for an engine temperature up to approx. 50°C)
The oil level must be located:
   
between the bottom marking -arrow A- and the top marking -arrow B- of the oil dipstick TRW.
In the area between markings „Min“ and „Max“ on the oil dipstick KOYO.
t  If the oil level is above the upper marking -arrow B- or „Max“, drain off some oil.
t  If the oil level is below the lower marking -arrow A- or „Min“, first check the hydraulic system for leaks (Inspecting power-assisted steering system for tightness → Chapter), and then one can begin to top up the system with hydraulic oil. It is not enough to simply top up the oil.
t  Do not use drained hydraulic oil again.
–  Screw the screwed lid onto the engine pump aggregate reservoir.
  S48-0226

Hydraulic oil at a normal operating temperature (for an engine temperature above 50°C) > < Inspecting hydraulic oil level, if necessary topping up