skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Available functions when using the vehicle system testerV.A.G 1552 > < Indication of faults by means of warning light for ServotronicK92
Connect vehicle system testerV.A.G 1552 or fault read-out scan toolV.A.G 1551 and select functions.
Connect vehicle system tester -V.A.G 1552- or fault read-out scan tool -V.A.G 1551- and select functions.
Special tools and workshop equipment required
t  vehicle system tester -V.A.G 1552- or fault read-out scan tool -V.A.G 1551-
  Note
t  The description of the self-diagnosis only relates to vehicle system tester -V.A.G 1552- using the current program card.
t  The use of fault reader -V.A.G 1551- with integrated printer is similar. A minor deviation on the display read-out is possible.
Test conditions
l  Fuses according to current flow diagram O.K.
l  Battery voltage at least 11.5 volts
l  All electrical components disconnected
The diagnostic connection is located on the left below the storage compartment on the driver's side.
–  Unclip cover and remove downward.
   
–  Connect vehicle system tester -V.A.G 1552- or fault read-out scan tool -V.A.G 1551- with appropriate cable.
–  Switch on ignition.
  S01-0087
Readout on display:
  Note
If there is nothing on the display: → Operating instructions of vehicle system tester
–  Enter address word 44 for „steering aid“ and confirm the entry with Q.
 
Vehicle system test               HELP
Enter address word XX
Readout on display:
t  6Q0423156 : Version number of the control unit
t  Power steering: system designation
t  0001: Software version
t  Coding 00110: coding of the control unit
t  WSC XXXXX: Workshop code
–  Press .
 
6Q0423156   Power steering       0001 ->
Coding 00110                   WSC XXXXX
If one of the following messages appears in the display, carry out fault finding as stated in the fault finding programme in the diagnostic cable → Current flow diagrams, Electrical fault finding and Fitting locations
 
Vehicle system test               HELP
The control unit does not respond
or
 
Vehicle system test               HELP
Fault in communication set-up
or
 
Vehicle system test               HELP
K cable does not connect to earth
or
 
Vehicle system test               HELP
K cable does not connect to pos. term.

Available functions when using the vehicle system testerV.A.G 1552 > < Indication of faults by means of warning light for ServotronicK92