Fabia Mk1
Removing and installing parts of the ignition system for engines with engine identification characters BBZ, BBY, BKY, BUD |
1 - | Connector |
q | 4-pin |
2 - | Ignition coils with power output stages -N70, N127, N291, N292- |
q | removing and installing → Chapter |
q | check → Chapter |
3 - | Connector |
q | 2-pin |
q | for knock sensor 1 -G61- |
q | contacts gold-plated |
4 - | Knock sensor 1 -G61-* |
q | check → Chapter |
q | Fitting location → Chapter |
5 - | 20 Nm |
q | The tightening torque influences the knock sensor function. |
6 - | Connector |
q | 3-pin |
q | for hall sender -G40- |
7 - | Hall sender - G40-* |
q | check → Chapter |
q | Fitting location → Chapter |
8 - | O-ring |
q | replace if damaged |
9 - | 10 Nm |
10 - | Spark plug, 30 Nm |
q | use of the spark plug wrench e.g. -3122 B - for removing and installing |
q | Type and electrode spacing → Fabia |
11 - | Support |
q | Tighten at cylinder head cover to 5 Nm |