WARNING | The fuel system is under pressure! Before opening the system lay cleaning cloths around the connection point. Then release pressure by carefully opening. |
|
| Observe the following points to prevent injury to persons and/or damage to the injection and ignition system: |
| t
| For reasons of safety fuse no. 40 must be removed from the fuse holder before opening the fuel system, as the door contact switch could activate the fuel pump. |
| t
| Do not touch or remove ignition leads with the engine running or at start speed. |
| t
| Ignition must be switched off before disconnecting and re-connecting the cables of the fuel injection and the ignition system as well as of the test equipment. |
| If test and measuring devices are required during test drives observe the following: |
| t
| Always secure the test and measuring devices on the rear seat and also have a second person operate them there. |
| If the test and measuring devices are operated from the passenger seat, the passenger could be injured by the release of the passenger airbag in the event of an accident. |
| t
| If the engine must be operated at start speed without the engine starting: |
| For engines with engine identification characters AUA, AUB |
|
|
|
