skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

1.0/37; 1.4/44; 1.4/50 Drive Unit, Fuel injection > < Removing and installing parts of the exhaust gas recirculation system
Testing mechanical exhaust gas recirculation valve
Testing mechanical exhaust gas recirculation valve
Special tools and workshop equipment required
t  Hand vacuum pump, e.g. -VAS 6213- or -V.A.G 1390-
Test sequence
   
–  Lift the engine cover at the sides -arrows A- and pull out towards the front -arrow B-.
–  Disconnect vacuum hose on mechanical exhaust-gas recirculation valve.
  S10-0374
–  Connect hand vacuum pump -VAS 6213- or -V.A.G 1390- to valve.
–  Operate pump and observe.
   The diaphragm must move in the direction of the vacuum connection.
–  Detach hose of hand vacuum pump from mechanical exhaust gas recirculation valve.
   The diaphragm must move back to its original position against the direction of the arrow.
  S13-0161

1.0/37; 1.4/44; 1.4/50 Drive Unit, Fuel injection > < Removing and installing parts of the exhaust gas recirculation system