Fabia Mk1
Removing and installing parts of the charge air cooling |
Note
t | The charge-air system must be tight. |
t | Remove oil and grease from the charge pressure hoses and charge pressure pipes and from their connections before installing. |
1 - | Air deflector |
2 - | Charge air cooler |
q | removing and installing → Chapter |
3 - | 8 Nm |
4 - | O-ring |
q | replace if damaged |
5 - | Intake manifold pressure sender -G71- with intake manifold temperature sender -G72- |
6 - | Support |
7 - | 5 Nm |
8 - | O-ring |
q | replace if damaged |
9 - | Connecting hose |
10 - | Retaining clip |
q | replace if damaged |
11 - | Top charge-air pipe |
12 - | To induction pipe |
13 - | Rear charge air pipe with heating element |
q | for nordic countries |
14 - | Rear charge-air pipe |
15 - | From valve cover |
q | for crankcase ventilation |
16 - | From air filter |
17 - | Exhaust gas turbocharger |
18 - | Spring strap clamp |
19 - | Bottom charge air pipe |
20 - | Support |
q | screwed onto the V-ribbed belt holder → Chapter |