| For engine with engine identification characters AZQ, BME up to 11.05 |
| Special tools and workshop equipment required |
| t
| Vehicle system tester -V.A.G 1552- with cable -V.A.G 1551/3, 3A, 3B nebo 3C- |
| l
| No fault stored in fault memory, interrogating fault memory → Chapter |
| l
| Battery voltage at least 11.5 volts |
| l
| The throttle valve must be in idling position |
| –
| Connect vehicle diagnosis system, measurement and information system -V.A.G 1552-. Switch ignition on and select address word 01 “Engine electronics” → Chapter. |
| –
| Select function 04“Initiate basic setting” and also the display group 074. |
| After pressing the Q key, the adaptation is carried out automatically. |
|
|
|
