| Removing and installing injection pump |
| Special tools and workshop equipment required |
| t
| Torque wrench 5...50 Nm (e.g. -V.A.G 1331-) |
| t
| Adjusting straightedge -MP 1-312- |
| t
| Adjusting device for TDC -MP 1-313- |
| t
| Counterholder -MP 1-216- or -T30004 - |
| t
| Two-arm extractor -T40001- |
| t
| Ring spanner for injection lines (e.g. -3035-) |
| t
| Hand vacuum pump -V.A.G 1390- |
| t
| Adapter -V.A.G 1318/10- |
| t
| Wrench for timing belt-tensioning pulley (e. g. -Matra V 159-, -Hazet 2587- or - Stahlwille 127-17-) |
| t
| Supporting device -MP 9-200- |
|
|
|
