Skoda Workshop Service and Repair Manuals > Fabia Mk1 > Engine | 1.9/74 TDI Engine, Fuel Injection | Fuel preparation system Diesel injection | Engine control unit | Activating and deactivating cruise control system (CCS)

Activating and deactivating cruise control system (CCS)

Special tools and workshop equipment required

t	Vehicle system tester -V.A.G 1552- with cable -V.A.G 1551/3, 3A, 3B oder 3C-

Test condition

l	No fault stored in fault memory, interrogating fault memory → Chapter.

Procedure

–	Connect vehicle system tester -V.A.G 1552-. Switch ignition on and select address word 01 “Engine electronics” → Chapter.

Readout on display, e.g.:

If “G000SG” is displayed, the cruise control system is active

038906019AF 1.9l R4  EDC G000SG  1056 ->

Coding 00002                   WSC XXXXX

Readout on display:

If “000SG” is displayed, the cruise control system is not active

–

Press →.

–	Select function 11 “login procedure”.

038906019AF 1.9l R4  EDC  000SG  1056 ->

Coding 00002                   WSC XXXXX

Readout on display:

–	Enter code number as stated in the table.

Login procedure

Enter code number  XXXXX

Code number	Cruise control system (CCS)
11463	Activate the cruise control system
16167	Deactivate the cruise control system

–	Confirm with Q.

–	Select function 06 “End output” and confirm entry with Q.

After activating the cruise control system perform a test drive as a functional test.

Skoda Workshop Service and Repair Manuals