skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Test injected quantity and spray pattern > < Inspecting the injection rate, tightness and jet formation of the injectors

Fabia Mk1

Check tightness
Check tightness
–  Initiate final control diagnosis and actuate injector of cylinder 1 -N30- → Chapter; the fuel delivery unit must run.
–  Test the tightness of the injectors (visual inspection). With the fuel delivery unit running, only 1 to 2 drops a minute should drip out at each valve.
If the fuel loss is greater than this:
–  End final control diagnosis and replace the leaking injector.
  Note
Replace seals at the same time.
   

Test injected quantity and spray pattern > < Inspecting the injection rate, tightness and jet formation of the injectors