skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replacing dessicator insert > < Running-in instructions for the compressor

Fabia Mk1

Removing and installing the condenser
Removing and installing the condenser
Must only be carried out in a specialist service centre which has suitably trained personnel and is fitted out for working on the refrigerant circuit!
Removing
–  Drain the refrigerant circuit with the aid of the A/C service station.
–  Removing the lock carrier → Body Work; Rep. Gr.50.
–  Removing refrigerant lines from the condenser → Fig. and → Fig..
   
–  Release screws -3-.
   Tightening torque: 5 Nm
–  Remove condenser -4- from the radiator -1-.
–  The sealing strips -2- attached to the side of the condenser (are no longer mounted in vehicles after 03.06).
Install
Installation is carried out in the reverse order. Pay attention to the following:
–  Replacing dessicator insert → Chapter.
–  Fill the refrigerant circuit with the aid of the A/C service station.
  S87-0138

Replacing dessicator insert > < Running-in instructions for the compressor