skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing retaining plate with solenoid valves N88 through N92 > < Removing and installing ATF strainer

Fabia Mk1

Solenoid valveN93
Solenoid valve -N93-
Removing
–  Removing the oil pan → Chapter.
   
–  Release screw -1- and remove wire for solenoid valve from screw.
–  Release screws -arrows-.
–  Release connector -2-.
–  Pull out solenoid valve -3-.
Installing
Installation is carried out in the reverse order.
–  Always replace the O-rings of the solenoid valve.
–  Tighten screw -1- (M6 x 35 mm) and screws -arrows- (M6 x 75 mm) to 8 Nm.
–  Installing the oil pan → Chapter.
–  Fill with ATF → Chapter.
  S38-0028

Removing and installing retaining plate with solenoid valves N88 through N92 > < Removing and installing ATF strainer