Fabia Mk1
|
Note| t | Summary of components - Hydraulics → Chapter. |
| t | Disconnect earth strap of the battery. |
| t | Before disconnecting the battery determine the code of radio sets fitted with anti-theft coding. |
| t | If the battery earth strap is disconnected and connected, carry out additional operations → Electrical System; Rep. Gr.27. |
| t | Grease all bearing and contact surfaces with Polycarbamide Grease -G 052 142 A2-. |
| t | Prior to working on the foot controls remove the storage area on the driver's side → Body Work; Rep. Gr.70. |
| 1 - | Support/Front wall |
| q | for master cylinder and bracket |
| 2 - | Gasket |
| q | always replace when installing |
| 3 - | Bracket |
| 4 - | Screw |
| 5 - | Gas/brake foot controls |
| 6 - | 25 Nm |
| q | always replace when installing |
| 7 - | Clutch pedal switch |
| q | Always push the clutch pedal down when removing or installing the switch. |
| q | before removing the clutch pedal → Item turn the switch 90° to the right and lead out through the removal opening |
| 8 - | Over-centre helper spring |
| q | removing and installing → Chapter |
| 9 - | Spacer bush |
| 10 - | Bushing |
| 11 - | Clutch pedal |
| q | removing and installing → Chapter |
| 12 - | Support |
| 13 - | 25 Nm |
| q | always replace |
| 14 - | Master cylinder |
| q | removing and installing → Chapter |
| 15 - | Spring strap clip |
| 16 - | Tubing |
| 17 - | Bearing/over-helper centre spring |
| q | insert in bracket |
| q | always replace |
| q | Fitting position: the peg -arrow- clips into the master cylinder recess |
| 18 - | Screw |
| q | Pedal stop on bracket |
| 19 - | Pedal stop |
| q | screw onto bracket with screw → Item |
| 20 - | 25 Nm |
| q | always replace |
