| Removing and installing, adjusting clutch pedal switch -F36- with angular housing |
Note | The clutch pedal switch -F36- may only be installed once to ensure that it has an adequately tight fit in the bracket for clutch pedal. |
| –
| Unplug connector from the clutch pedal switch -F36-. |
| –
| Turn clutch pedal switch -F36- at the housing 90° to the left and remove it from the support. |
| –
| Remove tappet up to the stop |
| –
| Press down clutch pedal as far as possible by hand. |
| –
| Insert clutch pedal switch into the support and turn 90° to the right. |
| –
| Insert connector for the clutch pedal switch - F36-. |
|
|
|
