Fabia Mk1
| Parts of cooling system on the side next to the body - Summary of components |
| 1 - | Radiator |
| q | removing and installing → Chapter |
| q | after replacing fill entire system with fresh coolant |
| 2 - | O-ring |
| q | replace |
| 3 - | Top coolant hose |
| q | attached to radiator by retaining clips |
| q | Connection diagram for coolant hoses: |
| t | For engine with identification characters AMF → Chapter |
| t | For engine with identification characters BNM, BNV: → Chapter |
| 4 - | Screw cap |
| q | check pressure → Chapter |
| 5 - | Connector |
| 6 - | Double screw, 2 Nm |
| 7 - | Fan shroud |
| 8 - | 5 Nm |
| 9 - | Expansion reservoir |
| q | Check the cooling system for tightness → Chapter |
| q | Connection diagram for coolant hoses: |
| t | For engine with identification characters AMF → Chapter |
| t | For engine with identification characters BNM, BNV: → Chapter |
| 10 - | Auxiliary fan |
| q | on vehicles with air conditioning |
| 11 - | Fan holder |
| 12 - | Retaining clip |
| q | for fan cable |
| q | check tightness |
| 13 - | Radiator fan |
| 14 - | Support |
| q | for plug of fan |
| 15 - | Bottom coolant hose |
| q | attached to radiator by retaining clips |
| q | Connection diagram for coolant hoses: |
| t | For engine with identification characters AMF → Chapter |
| t | For engine with identification characters BNM, BNV: → Chapter |
| 16 - | Thermo-switch for radiator fan -F18-, 35 Nm |
| q | switching temperatures: |
| 1. Stage |
| t | on: 92...97°C |
| t | off: 84...91°C |
| 2. Stage |
| t | on: 99...105°C |
| t | off: 91...98°C |
| 17 - | Bottom radiator bearing |
| 18 - | 5 Nm |
| 19 - | Top radiator bearing |
